Emerald Scan™ Specifications Model: Emerald Scan™ Voltage 120v~60Hz or 230v~50Hz Lasers: 4.9mW Green Diode Breaker: Dimensions: 5.5” (L) x 8” (W) x 16” (H) Weight: 7 Lbs. (3kg) Duty Cycle: None Ventilation: Fan Cooled Warranty: 90 Days *Voltage is preset at the factory and can not be changed by the user.
The sole responsibility of American DJ us on the web at www.americandjeurope.com for any comments or ®...
Page 3
9 10 Head 4 Emerald Scan™ Warranty Registration The Emerald Scan™ carries a 90 day limited warranty. Please fill out Master/ Slave Chart the enclosed warranty card to validate your purchase. All returned PROGRAM2 service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number.
5. XLR Output Jack - This jack is used to transmit the incoming DMX signal to another DMX fixture, or transmit a Master/Slave signal to the next Emerald Scan™ in the chain. For best results in DMX or Master/Slave mode terminate this jack if it is the last unit in the chain.
Page 7
Master/Slave configuration. It can operate you fixture. also operate via DMX controller. The Emerald Scan™ is ready to be DMX-512: plugged in out of the box. After plugging the power cord into a power DMX is short for Digital Multiplex.
Page 8
The Emerald Scan™ is a three channel DMX unit. The DMX COMMON address is set on the side panel of the Emerald Scan. ™ Your unit and Termination reduces signal errors and DMX + avoids signal transmission problems...