1. Manuals
  2. Brands
  3. Cheetah Manuals
  4. Camera Flash
  5. CL-180
  6. Instruction manual

Cheetah CL-180 Instruction Manual

Powerful & portable flash
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cheetah light LLC.
www.cheetahstand.com
info@cheetahstand.com
(214)734-1198
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CL-180 and is the answer not in the manual?

Questions and answers

Related Manuals for Cheetah CL-180

Summary of Contents for Cheetah CL-180

  • Page 1 Cheetah light LLC. www.cheetahstand.com info@cheetahstand.com (214)734-1198 Instruction Manual...

  • Page 2: For Your Safety

    Hi-Speed Sync Triggering FOR YOUR SAFETY 09 • MF-Assist Beam Warning! Always keep the CL-180 dry. Do not use in rain or in damp conditions. 09 • Buzz Function This product contains high-voltage electronic parts. Touching the high-voltage 09 • Wireless Control Function circuit inside may result in electric shock.
  • Page 3 2. Insert the reflector into the Accessory Mount (1). 18. SET Button 19. ON/OFF Power Switch 20. Test Button/ Flash Ready Indicator 21. Select Dial This unit is not self powered. It uses Cheetah Lithium battery or Cheetah Ni-MH Battery (sold separately). - 03 - - 04 -...

  • Page 4: Using The Flash

    1/1-0.7 1/2-0.3 1/2-0.7 … The flash unit is not powered by itself, but draws power from Cheetah Lithium Battery or 1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 Cheetah Ni-MH Battery (sold separately). For the instructions of the power pack, see the related user manual.
  • Page 5 Press MODE Selection Button (17) to enter M mode. In this mode, you can set the flash unit onto your camera hot shoe or your trigger hot shoe for firing. Before shooting, adjust the power output of CL-180. When the camera’s shutter is pressed, Flash Output the flash will fire.

  • Page 6: Technical Data

    160 (10ft, ISO 200, with standard reflector) To control the flash wirelessly, you need a Cheetah CL series remote control set Guide No. (CL-Tx and CL-Rx). Insert CL-Rx receive into the Wireless Control Port (7) on the Approx.
  • Page 7 Maintenance Shut down the device immediately should abnormal operation be detected. Avoid sudden impacts and the lamp should be dedusted regularly. It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.

Table of Contents