Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cheetah cl-360x
Summary of Contents for Cheetah cl-360x
- Page 2 Cheetah Light LLC. www.cheetahstand.com...
-
Page 3: Foreword
It offers studio quality light for outdoor and live shooting. Be cautious when using the CL-360X on your camera. CL-360X is slightly heavy so that an CL-360X on your The CL-360X offers: camera may damage the camera hotshoe. -
Page 4: Table Of Contents
Contents Foreword For your safety Name of Parts Body LCD Panel Included Accessories Separately Sold Accessories Installing Reflector (Other Accessories) Attaching Flash Tube Connecting to a Power Pack Connecting the Flash to a Camera Replacing the Off-Camera Adapter Power Management Flash Mode—... -
Page 5: Name Of Parts
Name of Parts Name of Parts Body: LCD Panel (1)E-TTL Autoflash ETTL : E-TTL II/E-TTL S1/S2 Tube Socket autoflash Umbrella Mounting Hole : Auto focus Accessory Locking Ring Manual focus (Page 13) Accessory Mount : High-speed sync (Page 11) : Master unit : Second curtain sync (Page 12) flash ON : Master unit... -
Page 6: Included Accessories
X1C Wireless Flash Trigger, CL-Tx/Rx Remote Control, Softbox, Beauty Dish, Fold up umbrella, Snoots, The flash unit is not powered by itself, but draws power from CHEETAH power pack L4500 (sold separately). For the instructions of the power pack, see the related user manual. -
Page 7: Connecting The Flash To A Camera
There is a 1/4" mounting hole at the bottom of the off-camera adapter. Setting FEC: After replacing the adapter, the flash can be used mounting on CHEETAH AD-S13 portable light boom, AD-S16 floor light stand, and almost any other light stand. -
Page 8: Fel: Flash Exposure Lock
Flash Mode — E-TTL Autoflash Flash Mode — E-TTL Autoflash Press function button 3 Set the exposure bracketing Press <SET> button again to Press Function Button 4 Check that < > is displayed < >. The icon < > amount. confirm the setting. -
Page 9: Flash Mode-M: Manual Flash
Flash Mode — M: Manual Flash Flash Mode — Multi: Stroboscopic Flash The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd stop increments. To obtain a correct With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving flash exposure, use a hand-held flash meter to determine the required flash output. -
Page 10: Wireless Flash Shooting: Optic Transmission
Wireless Flash: Optic Transmission Wireless Flash: Optic Transmission This product supports wireless flash application and functions as either a master or a slave unit. As a 2. Master Unit's Flash OFF master unit, it can control Canon speedlites e.g. 580EXII, 600EX-RT via wireless. As a slave unit, it can When the master unit is set to OFF, only the slave units will fire a flash. -
Page 11: Ettl: Fully Automatic Wireless Flash Shooting
ON, automatic control is implemented to make all groups of flashes fire the same flash output and ensure the total flash output up is to standard exposure. Master Unit Setting Slave Unit Setting Check the communication CL-360X channel. ● Attach a camera ●... -
Page 12: Ettl: Use The Wireless Shooting Of Flash Ratio
Wireless Flash: Optic Transmission Wireless Flash: Optic Transmission 5. ETTL: Use the Wireless Shooting of Flash Ratio About Slave Group Control Autoflash Shooting with Two Slave Unit If three slave units are all set to < A > in terms of slave ID, these slave units will Slave group A be controlled as if they were one camera flash in slave group A. -
Page 13: Multi: Wireless Flash Shooting With Manual Flash
The basic relative position and operation range are as shown in the picture. You can then perform wireless E-TTL II /ETTL autoflash shooting just by setting the master unit to <ETTL>. CL-360X adopts CHEETAH 2.4G wireless X system, which can be used in combination with other products in our factory. As a slave unit, is compatible with Canon E-TTL II and Nikon i-TTL systems. -
Page 14: Other Applications
Other Applications Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Control Function Wireless Multiple Flash Shooting The flash unit is built with a Wireless Control Port so that you can You can divide the slave units into two or three groups and perform E-TTL II/E-TTL autoflash while changing the wirelessly adjust the power level of the flash and the flash triggering. -
Page 15: Bounce Flash
Turn the Select Dial to set the desired number. Pressing < SET > button will confirm the settings. ● Use remote cable to connect the camera and the CL-360X through its PC sync socket, and the flash will be fired ●... -
Page 16: Control With The Camera's Menu Screen
Control with the Camera's Menu Screen Protection Function If the camera flash is attached to an EOS camera which has a speedlite control function, the flash can be controlled 1. Over-Temperature Protection using the camera's menu screen. For the menu operation procedure, refer to your camera's instruction manual. To avoid overheating and deteriorating the flash head, do not fire more than 75 continuous flashes in fast ●... -
Page 17: Technical Data
USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common USB connection line is applicable. range (approx.) 2.4G 70m (CL-360X as a transmitter) 100m (X1C/X1N as a transmitter) Channels Optic 4 (1, 2, 3, and 4)
Need help?
Do you have a question about the cl-360x and is the answer not in the manual?
Questions and answers