Recharging With The Dc Charging Cable - Duracell Powerpack 300 Owner's Manual

5. While the Duracell
Battery Status LED is red. If the Duracell
is completely discharged, a typical recharge may take
up to 24 hours. When fully charged, the Battery Status
LED changes to green and the Duracell
ready to use.
Important: The 24-hour charging time for the Duracell
Powerpack assumes that there is 120 V at the AC wall
outlet. If the voltage is less than 120 V AC, it may take
more than 24 hours to fully recharge the Duracell
Powerpack. If, after 24 hours of charging, the Battery
Status LED is still red, continue to charge the unit for
another 12 hours. The Duracell
for use even if the Battery Status LED remains red.
Once the Duracell
voltage and current automatically reduces to a maintenance level
and the Duracell
to the AC charger. If your utility power is interrupted, the charging
process automatically restarts when power returns.

Recharging with the DC Charging Cable

Using the DC charging cable, the Duracell
recharged while you drive your vehicle.
Important: Although the charge regulation circuitry in the
Duracell
method, most vehicle voltage regulators will ensure that
the Duracell
Battery Status LED will not illuminate when the Duracell
Powerpack is recharged using the DC charging cable.
WARNING: Fire and explosion hazard
Do not use this recharging method if your vehicle has
abnormally high voltage electrical systems that operate
®
Powerpack is fully charged, the charging
®
Powerpack may be left permanently connected
®
Powerpack does not operate with this charging
®
Powerpack is not overcharged.Note: The
®
Powerpack is recharging, the
®
Powerpack will be ready
®
24
®
Powerpack
®
Powerpack is
®
Powerpack can be
®
®