GRASS VALLEY K2 Manual
Storage san and direct-connect
Hide thumbs
Also See for K2:
- Instruction manual (394 pages) ,
- Installation and service manual (366 pages) ,
- Service manual (142 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GRASS VALLEY K2
Summary of Contents for GRASS VALLEY K2
- Page 1 Storage SAN and Direct-Connect Cabling Guide 071-8713-00 September 2009...
- Page 2 Affiliate with the N.V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040.001 The Quality System of: Thomson Inc, and it’s wordwide Grass Valley division affiliates DBA GRASS VALLEY Headquarters 15655 SW Greystone Ct. 10 Presidential Way 400 Providence Mine Rd...
- Page 3 Storage SAN and Direct-Connect Cabling Guide 071-8713-00 September 2009...
- Page 4 Copyright Copyright © Grass Valley, Inc. All rights reserved. Printed in the United States of America. Portions of software © 2000 – 2009, Microsoft Corporation. All rights reserved. This document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U.S.
-
Page 5: Table Of Contents
2900 HP GigE switch for basic K2 SAN ............. 29 2900 HP GigE switch for redundant K2 SAN ............. 30 2900 HP GigE switch for basic nearline K2 SAN ..........30 2900 HP GigE switch for redundant nearline K2 SAN........31 Cable K2 Media Server ................... - Page 6 Cable NH1 K2 Media Server ................... 46 Dell 1950 NH1 for online K2 SAN ..............46 Dell 1950 NH1 for basic nearline K2 SAN ............46 Dell 1950 NH1 for redundant nearline K2 SAN ..........47 Dell R610 NH1 for online K2 SAN ..............47 Dell R610 NH1 for basic nearline K2 SAN ............
-
Page 7: About Custom K2 Sans
Then follow the references below the system diagram to locate cabling instructions for the individual devices of your K2 system. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information on K2 SAN levels and devices. Refer to the K2 System Guide for more information on direct-connect K2 client storage. -
Page 8: Level 2 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 9: Level 2 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 10: Level 3 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 11: Level 3 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 12: Level 10 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 13: Level 10 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 14: Level 20 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 15: Level 20 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 16: Level 30 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 17: Level 30 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 18: Level 35 Basic K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 19: Level 35 Redundant K2 San
This manual documents the default GigE switch configuration. Other configurations are available, depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System Instruction Manual or the K2 SAN Installation and Configuration Guide for more information. -
Page 20: Nearline 10 Basic K2 San
“2900 HP GigE switch for basic nearline K2 SAN” on page 30 NH1 K2 Media Server Dell 1950 “Dell 1950 NH1 for basic nearline K2 SAN” on page 46 Dell R610 “Dell R610 NH1 for basic nearline K2 SAN” on page 47 NH1-10GE K2 Media Dell 1950 “Dell 1950 NH1-10GE for basic nearline K2 SAN”... -
Page 21: Nearline 10 Redundant K2 San
“2900 HP GigE switch for redundant nearline K2 SAN” on page 31 NH1 K2 Media Server Dell 1950 “Dell 1950 NH1 for redundant nearline K2 SAN” on page 47 Dell R610 “Dell R610 NH1 for redundant nearline K2 SAN” on page 48 NH1-10GE K2 Media Dell 1950 “Dell 1950 NH1-10GE for redundant nearline K2 SAN”... -
Page 22: K2 Client With Direct-Connect Storage
SD-00, and HD-00. K2 Summit “K2 Summit Production Client with direct-connect storage” Production Client on page 27 K2 RAID Level 30 K2 RAID “K2 RAID for K2 client direct-connect storage” on page 67 K2 Storage Cabling Guide 03 September 2009... -
Page 23: Cable K2 Devices
Chapter Cable K2 devices As directed by the system diagram for your K2 storage, cable the individual devices of your K2 system using the instructions in the following sections. • “Cable K2 client” on page 24 • “Cable Gigabit Ethernet switch” on page 28 •... -
Page 24: Cable K2 Client
Chapter 2 Cable K2 devices Cable K2 client As directed by the system diagram for your K2 storage, cable the K2 client devices using the instructions in this section. • “K2 Media Client for basic K2 SAN” on page 24 •... -
Page 25: K2 Media Client For Redundant K2 San
These cabling instructions apply to the following: • K2 Media Client on a redundant K2 SAN K2 Media Client model SD-00 is shown. Other models have similar connections. Refer to each model’s K2 Media Client Quick Start Guide for additional cabling details. SDI CH 1... -
Page 26: K2 Summit Production Client For Redundant K2 San
K2 Summit Production Client for redundant K2 SAN These cabling instructions apply to the following: • K2 Summit Production Client on a redundant K2 SAN Refer to the K2 Summit Production Client Quick Start Guide for additional cabling details. To media (iSCSI) port... -
Page 27: K2 Summit Production Client With Direct-Connect Storage
• K2 Summit Production Client with direct-connect K2 RAID storage Refer to the K2 System Guide for additional information about direct-connect storage. Refer to the K2 Summit Production Client Quick Start Guide for additional cabling details. K2 Summit Production Client... -
Page 28: Cable Gigabit Ethernet Switch
Chapter 2 Cable K2 devices Cable Gigabit Ethernet switch As directed by the system diagram for your K2 SAN’s level, cable the switch or switches for your K2 SAN using the instructions in this section. • “3400cl HP GigE switch for basic K2 SAN” on page 28 •... -
Page 29: 3400Cl Hp Gige Switch For Redundant K2 San
ISLs 2 - 20 even To the media ports on switch A, make one media connection from each K2 Media Client or other iSCSI client and make two connections from media server A. To the media ports on switch B, make the second media connection from each K2 Media Client or other iSCSI client and make two connections from media server B. -
Page 30: 2900 Hp Gige Switch For Redundant K2 San
Chapter 2 Cable K2 devices 2900 HP GigE switch for redundant K2 SAN These cabling instructions apply to the following: • HP 2900 series Gigabit Ethernet switch on a basic (non-redundant) online K2 SAN. Media (iSCSI) ports Control ports 10 Gig connections to... -
Page 31: 2900 Hp Gige Switch For Redundant Nearline K2 San
2900 HP GigE switch for redundant nearline K2 SAN 2900 HP GigE switch for redundant nearline K2 SAN These cabling instructions apply to the following: • HP 2900 series Gigabit Ethernet switch on a redundant nearline K2 SAN. 10 Gig FTP connections to rear of switch for... -
Page 32: Cable K2 Media Server
Chapter 2 Cable K2 devices Cable K2 Media Server As directed by the system diagram for your K2 SAN’s level, cable the K2 Media Server or Servers for your K2 SAN using the instructions in this section. • “Dell 2850 for basic K2 SAN” on page 33 •... -
Page 33: Dell 2850 For Basic K2 San
Dell 2850 for basic K2 SAN Dell 2850 for basic K2 SAN These cabling instructions apply to the following: • Dell 2850 PowerEdge Server on a basic (non-redundant) online K2 SAN. iSCSI interface ports (GigE media) Fibre Channel GigE GigE... -
Page 34: Dell 1950 Gs For Level 10 Basic K2 San
Chapter 2 Cable K2 devices Dell 1950 GS for Level 10 basic K2 SAN These cabling instructions apply to the following: • Dell 1950 PowerEdge Server on a Level 10 basic (non-redundant) K2 SAN. Fibre Channel To media (iSCSI) to RAID controller... -
Page 35: Dell 1950 Gs For Level 20 Basic K2 San
Dell 1950 GS for Level 20 basic K2 SAN Dell 1950 GS for Level 20 basic K2 SAN These cabling instructions apply to the following: • Dell 1950 PowerEdge Server on a Level 20 basic (non-redundant) K2 SAN. Fibre Channel To media (iSCSI) -
Page 36: Dell 1950 Gs For Level 35 Basic K2 San
Chapter 2 Cable K2 devices Dell 1950 GS for Level 35 basic K2 SAN These cabling instructions apply to the following: • Dell 1950 PowerEdge Server on a Level 35 basic (non-redundant) K2 SAN. To media (iSCSI) Fibre Channel to RAID controller... -
Page 37: Dell 1950 Gs For Level 35 Redundant K2 San
Dell 1950 GS for Level 35 redundant K2 SAN Dell 1950 GS for Level 35 redundant K2 SAN These cabling instructions apply to the following: • Dell 1950 PowerEdge Server on a Level 35 redundant K2 SAN. To media (iSCSI) Fibre Channel... -
Page 38: Dell 2950 For Basic K2 San
Chapter 2 Cable K2 devices Dell 2950 for basic K2 SAN These cabling instructions apply to the following: • Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a basic (non-redundant) online K2 SAN. To media (iSCSI) Fibre Channel... -
Page 39: Dell 2950 For Level 3 Basic K2 San
Dell 2950 for Level 3 basic K2 SAN Dell 2950 for Level 3 basic K2 SAN These cabling instructions apply to the following: • Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a Level 3 basic (non-redundant) K2 SAN. -
Page 40: Dell 2950 For Level 3 Redundant K2 San
Chapter 2 Cable K2 devices Dell 2950 for Level 3 redundant K2 SAN These cabling instructions apply to the following: • Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a Level 3 redundant K2 SAN. To media (iSCSI) -
Page 41: Dell 2950 Ls For Basic K2 San
Dell 2950 LS for basic K2 SAN Dell 2950 LS for basic K2 SAN These cabling instructions apply to the following: • Dell 2950 PowerEdge Server with four iSCSI interface adapters (TOEs) on a basic (non-redundant) online K2 SAN. Fibre Channel... -
Page 42: Dell R610 Gs For Level 10 Basic K2 San
Chapter 2 Cable K2 devices Dell R610 GS for Level 10 basic K2 SAN These cabling instructions apply to the following: • Dell R610 PowerEdge Server on a Level 10 basic (non-redundant) K2 SAN. Fibre Channel To media (iSCSI) to RAID controller... -
Page 43: Dell R610 Gs For Level 20 Redundant K2 San
GigE switch B Dell R610 GS for Level 35 basic K2 SAN These cabling instructions apply to the following: • Dell R610 PowerEdge Server on a Level 35 basic (non-redundant) K2 SAN. Fibre Channel To media (iSCSI) to RAID controller... -
Page 44: Dell R610 Gs For Level 35 Redundant K2 San
Chapter 2 Cable K2 devices Dell R610 GS for Level 35 redundant K2 SAN These cabling instructions apply to the following: • Dell R610 PowerEdge Server on a Level 35 redundant K2 SAN. To media (iSCSI) Fibre Channel to RAID controller... -
Page 45: Dell R710 Ls For Redundant K2 San
Dell R710 LS for redundant K2 SAN Dell R710 LS for redundant K2 SAN These cabling instructions apply to the following: • Dell R710 PowerEdge Server on a redundant online K2 SAN. Fibre Channel To media (iSCSI) to RAID controller 0... -
Page 46: Cable Nh1 K2 Media Server
Chapter 2 Cable K2 devices Cable NH1 K2 Media Server As directed by the system diagram for your K2 SAN’s level, cable the NH-1 K2 Media Server or Servers for your K2 SAN using the instructions in this section. •... -
Page 47: Dell 1950 Nh1 For Redundant Nearline K2 San
RAID controller Dell R610 NH1 for basic nearline K2 SAN These cabling instructions apply to the following: • Dell R10 PowerEdge Server NH1 on a basic (non-redundant) nearline K2 SAN. FTP: To control port To control port Fibre Channel... -
Page 48: Dell R610 Nh1 For Redundant Nearline K2 San
Chapter 2 Cable K2 devices Dell R610 NH1 for redundant nearline K2 SAN These cabling instructions apply to the following: • Dell R10 PowerEdge Server NH1 on a redundant nearline K2 SAN. FTP: To control port To control port Fibre Channel to... -
Page 49: Cable Nh1-10Ge K2 Media Server
Cable NH1-10GE K2 Media Server Cable NH1-10GE K2 Media Server As directed by the system diagram for your K2 SAN’s level, cable the NH1-10GE K2 Media Server or Servers for your K2 SAN using the instructions in this section. •... -
Page 50: Dell 1950 Nh1-10Ge For Redundant Nearline K2 San
Chapter 2 Cable K2 devices Dell 1950 NH1-10GE for redundant nearline K2 SAN These cabling instructions apply to the following: • Dell 1950 PowerEdge Server NH1-10GE on a redundant nearline K2 SAN. Gb 1 Gb 2 To control port FTP: To 10 Gig port... -
Page 51: Dell R610 Nh1-10Ge For Redundant Nearline K2 San
Dell R610 NH1-10GE for redundant nearline K2 SAN Dell R610 NH1-10GE for redundant nearline K2 SAN These cabling instructions apply to the following: • Dell R610 PowerEdge Server NH1-10GE on a redundant nearline K2 SAN. To control port FTP: To 10 Gig port... -
Page 52: Cable K2 Raid
Chapter 2 Cable K2 devices Cable K2 RAID As directed by the system diagram for your K2 storage, cable the K2 RAID devices using the instructions in this section. • “K2 RAID for Level 2 basic K2 SAN” on page 53 •... -
Page 53: K2 Raid For Level 2 Basic K2 San
K2 RAID for Level 2 basic K2 SAN K2 RAID for Level 2 basic K2 SAN These cabling instructions apply to the following: • Level 2 (NEC 1300) K2 RAID on a Level 2 basic (non-redundant) K2 SAN. To K2 Media Server... -
Page 54: K2 Raid For Level 2 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Level 2 redundant K2 SAN These cabling instructions apply to the following: • Level 2 (NEC 1300) K2 RAID on a Level 2 redundant K2 SAN. To K2 Media To K2 Media... -
Page 55: K2 Raid For Basic K2 San
K2 RAID for basic K2 SAN K2 RAID for basic K2 SAN These cabling instructions apply to the following: • Level 3 (NEC 1400) K2 RAID on a Level 3 basic (non-redundant) K2 SAN. To K2 Media To K2 Media... -
Page 56: K2 Raid For Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for redundant K2 SAN These cabling instructions apply to the following: • Level 3 (NEC 1400) K2 RAID on a Level 3 redundant K2 SAN. To K2 Media To K2 Media To control port... -
Page 57: K2 Raid For Level 10 Basic K2 San
K2 RAID for Level 10 basic K2 SAN K2 RAID for Level 10 basic K2 SAN These cabling instructions apply to the following: • Level 10 K2 RAID (Condor with CL1 controller) on a Level 10 basic (non-redundant) K2 SAN. To K2 Media... -
Page 58: K2 Raid For Level 10 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Level 10 redundant K2 SAN These cabling instructions apply to the following: • Level 10 K2 RAID (Condor with CL1 controllers) on a Level 10 redundantK2 SAN. To K2 Media To K2 Media... -
Page 59: K2 Raid For Level 20 Basic K2 San
K2 RAID for Level 20 basic K2 SAN K2 RAID for Level 20 basic K2 SAN These cabling instructions apply to the following: • Level 20 K2 RAID (Condor with CL1 controller) on a Level 20 basic (non-redundant) K2 SAN. To NH server... -
Page 60: K2 Raid For Level 20 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Level 20 redundant K2 SAN These cabling instructions apply to the following: • Level 20 K2 RAID (Condor with CL1 controllers) on a Level 20 redundant K2 SAN. To NH server To K2 Media... -
Page 61: K2 Raid For Level 30 Basic K2 San
K2 RAID for Level 30 basic K2 SAN K2 RAID for Level 30 basic K2 SAN These cabling instructions apply to the following: • Level 30 K2 RAID (Condor with CL2 controller) on a Level 30 basic (non-redundant) K2 SAN. To K2 Media... -
Page 62: K2 Raid For Level 30 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Level 30 redundant K2 SAN These cabling instructions apply to the following: • Level 30 K2 RAID (Condor with CL2 controllers) on a Level 30 redundant K2 SAN. To K2 Media To K2 Media... -
Page 63: K2 Raid For Level 35 Basic K2 San
K2 RAID for Level 35 basic K2 SAN K2 RAID for Level 35 basic K2 SAN These cabling instructions apply to the following: • Level 35 K2 RAID (Condor with CL2 controller with expansion FC ports) on a Level 35 basic (non-redundant) K2 SAN. To K2 Media... -
Page 64: K2 Raid For Level 35 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Level 35 redundant K2 SAN These cabling instructions apply to the following: • Level 35 K2 RAID (Condor with CL2 controllers with expansion FC ports) on a Level 35 redundant K2 SAN. To K2... -
Page 65: K2 Raid For Nearline 10 Basic K2 San
K2 RAID for Nearline 10 basic K2 SAN K2 RAID for Nearline 10 basic K2 SAN These cabling instructions apply to the following: • Lx0 K2 RAID (Condor with CL1 controller) on a Nearline 10 basic (non-redundant) K2 SAN. To NH... -
Page 66: K2 Raid For Nearline 10 Redundant K2 San
Chapter 2 Cable K2 devices K2 RAID for Nearline 10 redundant K2 SAN These cabling instructions apply to the following: • Lx0 K2 RAID (Condor with CL1 controllers) on a Nearline 10 redundant K2 SAN. To NH To NH To NH... -
Page 67: K2 Raid For K2 Client Direct-Connect Storage
K2 RAID for K2 client direct-connect storage K2 RAID for K2 client direct-connect storage These cabling instructions apply to the following: • K2 RAID (Condor) providing direct-connect storage for a K2 Media Client or K2 Summit Production Client. To K2 client... - Page 68 Chapter 2 Cable K2 devices K2 Storage Cabling Guide 03 September 2009...
-
Page 69: For More Information
Because release notes contain the latest information, they are printed out and included in the K2 product shipping box, rather than included in the Documentation CD-ROM. You should always check the Grass Valley Website to determine if there is an updated version of release notes available. -
Page 70: On-Line Help Systems
Using the Dell Server documentation This manual contains all of the information you need to install the K2 SAN, however, a full set of Dell server documentation has been provided on the Dell Product Documentation CD-ROM. The Dell server documentation applies to the K2 Media Server. - Page 71 Dell CD-ROM package. This guide includes instructions for using the OpenManage software CD-ROM to install an operating system. The K2 Media Server comes fully configured and is ready for installation. To begin installation, refer to one of the installation chapters in this manual.
-
Page 72: Grass Valley Product Support
Grass Valley Product Support For technical assistance, to check on the status of a question, or to report new issue, contact Grass Valley Product Support via e-mail, the Web, or by phone or fax. Web Technical Support To access support information on the Web, visit the product support Web page on the Grass Valley Web site. - Page 73 Southern Europe – Spain +34 91 512 03 50 Middle East, Middle East +971 4 299 64 40 Near East, Africa Near East and Africa +800 80 80 20 20 +33 1 48 25 20 20 03 September 2009 K2 Storage Cabling Guide...
- Page 74 Chapter 3 For more information K2 Storage Cabling Guide 03 September 2009...