Taking Your Blood Pressure - A&D UA-631V Instruction Manual

Table of Contents

Advertisement

TaKinG yoUr Blood PressUre

Tips for Blood Pressure Monitoring:
Now you are ready. Follow these simple steps:
1 .
Sit comfortably with your left arm resting on
a flat surface so that the center of your upper
arm is at the same height as your heart.
2 .
Lay left arm on the table, palm up and thread cuff end through
metal loop, smooth side against arm. Then position the tube off-
center toward the inner side of arm in line with the little finger.
3 .
Pull the end of the cuff to tighten it, fold back the
extra material, and fasten securely. The cuff should
be snug but not too tight. You should be able to
insert two fingers between the cuff and your arm.
IMPORTANT: Measure pressure at the same time each day.
4 .
Confirm that the index
the proper fit range.
E-6
-631V Manual_English.indd 6
Relax for several moments before measurement.
Do not smoke or ingest caffeine at least 30 minutes prior to
measurement
Remove constricting clothing and place cuff on bare arm.
Unless your physician recommends otherwise, use left arm to
measure pressure.
Do not talk during measurement.
Do not cross legs, and keep your feet flat on floor during
measurement.
LifeSource Health Line (toll-Free): 1-888-726-9966
points within
Cuff
Tube
8/5/09 8:08:40 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents