Table of Contents
Advertisement
the time the memory controller srart sending commands to memory bank. The lower the value,
the sonner the memory controller can send commands out to the activated memory bank. Op-
tions are Auto, 1T and 2T. mode.
This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It
contains important information about the module's speed, size, addressing mode and various
other parameters, so that the motherboard memory controller (chipset) can better access the
memory device.
the ISA expansion card.
This item is used to choose the initate graphics controller which will be used as the primary
boot device.
This item is used to select the amount of system memory used by internal graphics device.
Dynamic Video Memory Technology (DVMT) dynamically allocates system memory for use
graphics performance.
The amount of video memory allocated depends upon the amount requested by the operating
system. When the memory is no longer required, it is returned to the operating system for use by
other applications or system functions. DVMT allocates memory based on system needs. This
BIOS option allows you to adjust the amount of memory available for DVMT.
wherein a static amount of page-locked graphics memory is allocated during driver initialization.
times, and will no longer be available to the OS.
DVMT is an enhancement of the UMA concept, where in the graphics driver allocates memory
as needed for running graphics applications. If a user is not performing any graphics-intensive
operations, most of the DVMT memory can be utilized by the OS for other uses. We recommend
using DVMT setting for better overall system performance.
This item is used to enable/disable PCI Express graphics port.
34
Hide quick links:
Advertisement
Table of Contents
