Smart Bios - Foxconn G41MD Series User Manual

Smart BIOS

Current FSB Speed
Current DRAM Speed
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
Post Error Message
vents user without password trying to get into your computer through smart boot menu.
This item displays the current CPU speed.
This item displays the current Front Side Bus clock.
This item displays the current CPU Ratio.
This item displays the current DRAM Speed.
Smart BIOS
: 1333MHz
: 800MHz
F9:Optimized Defaults
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
30
Options
Disabled
Enabled
Stop Blinking Condition
Always On
Reboot & Memory OK
Enter Setup or Skip
-