Enter Bios Setup; Main Menu - Foxconn G41MD Series User Manual

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <Del> to enter Setup, <Esc> to boot menu" appears at the bottom
of the screen, you can press <DEL> key to enter Setup.
!
We do not suggest that you change the default values in the BIOS Setup, and we
shall not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.
F9:Optimized Defaults
Each item in the main menu is explained below:
plus system date, time. They all can be viewed or set up through this menu.
The advanced system features can be set up through this menu. There are boot up settings.
Some special proprietary features (such as overclocking) can be set up through this menu.
The values for the chipset can be changed through this menu, and the system performance
can be optimized.
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O and other USB devices... etc.
Central Control Unit
Configure Time and Date. Display System Information... Configure Time and Date. Display System Information...
Load Optimal Defaults Load Optimal Defaults Load Optimal Defaults
Save & Exit Setup Setup
Exit Without Saving
23
F1:General Help