Advertisement
To Place an Intercom Call
Press l/C key.
•
Lift handset.
•
Ringing is heard.
•
When ringing stops, you are connected to the
•
other set's speaker.
Deliver your message.
•
To Answer an Intercom Call
Press I/C key.
•
Lift handset.
•
A two-way conversation may be held.
•
GROUP INTERCOM
Lets you call another party within your intercom
group by dialing a 1-or 2-digit code.
Press l/C GROUP key.
•
Dial the intercom code.
•
HANDSFREE
Press a free line key or HANDSFREE/MUTE key.
•
Dial number; either internal extension or
•
external access code + 10 digit number.
When called party answers, talk toward the
•
microphone on your telephone.
To Mute a HANDSFREE Call
You will continue to hear your party but they
•
can't hear you.
Press HANDSFREE/MUTE key.
•
To Return to a 2-way conversation
Press HANDSFREE/MUTE key again.
•
LISTEN ON HOLD
If the person you are talking to puts you on hold,
you can replace your handset and hear through the
speaker when the other party re-establishes the call.
Press HOLD key (line indicator flashes).
•
Replace handset.
•
Press the flashing line key. When other party
•
returns their voice is heard through the speaker.
Lift handset to resume conversation.
•
MESSAGE WAITING
When a caller leaves a message in your mailbox
your MESSAGE indicator will be lit.
Select your line (lift handset).
•
Press MESSAGE key to automatically be
•
connected to the MessageManager
dial the MessageManager number (access code +
10-digit number).
SPEED CALL
SPEED CALL-8 or -10
Lets you personally pre-program and store 8 or 10
frequently called telephone numbers on your
phone. Each phone number is assigned a 1-digit
code (0-7 or 0-9). By dialing the 1-digit code, the
phone number is dialed for you. Speed Call-8 or -10
cannot be shared.
SPEED CALL-30 or -50 or -70
Allows for the pre-programing, storing and sharing
of 30 or 50 or 70 frequently called telephone
numbers. Each phone number is assigned a 2-digit
code (00-29 or 00-49 or 00-69). By dialing the code,
the number is dialed for you. Speed Call-30 or -50
or 70 lists can be shared. If shared, only 1 phone is
designated as a controller and only the controller
can pre-program the phone numbers. Other
phones are programmed with access to use the
Speed Call-30 or -50 or -70 list.
To Program
•
Do not lift handset (no dial tone).
•
Press SPEED CALL key (indicator flashes).
•
Dial the 1- or 2-digit code + outside access code
•
+ 10-digit phone number.
Press SPEED CALL key (indicator goes out).
•
Repeat procedure for each number to be added
•
or changed.
To Use
•
Select a free line.
•
Press SPEED CALL key.
•
Dial 1- or 2-digit code.
•
Your Business Set may be equipped with some
features not covered in this guide.
Your communications manager will provide
you with instructions for their use.
MessageManager is a trade-mark of Stentor Resource Centre Inc. and the MTS design
TM
system or
mark is a registered trade-mark of Manitoba Telecom Services Inc., both used under license.
MTS STAT 9205
2012-02 (08)
Advertisement
