Searchcoils - Garrett Investigator G-500 Owner's Manual

When reassembling, make certain the coil cord
slides into its tube and is not pinched in any
way between the armrest and battery compart-
ment.
48

SEARCHCOILS

The 8 1/2-inch Crossfire searchcoil that
accompanies your Investigator G-500 is suit-
able for almost any target in any terrain.
Round Crossfire searchcoils are also available
in a 12 1/2-inch size for seeking large and
deep targets and a 4 1/2-inch Super Sniper coil
for use in locations where large amounts of
"trash" metal targets are present or in tight
places where a larger coil will not reach.
Also available for your Investigator G-500 are
elliptical Crossfire searchcoils, 5x10 and 3x7
inches in size. Elliptical coils give a wider scan
path, but will also reach into narrow spaces.
Since scanning power of this size coil is con-
centrated in a narrow strip down its middle,
only a few trash targets can ever be beneath it
at one time for the Investigator G-500 to ana-
lyze. Depending upon the type of metal, bottle-
caps are sometimes found to be more difficult
to reject than with round searchcoils.
Garrett G-500 PN 1529570 Rev B
49