Connecting The Hd200 Powerline Wall Mount F - Corinex CXP-HD200-WMEFe User Manual

2.7 Connecting the HD200 Powerline Wall Mount F

To connect the Powerline adapter to your computer, follow the steps listed below.
1. Connect the supplied Ethernet cable to the Ethernet (LAN) port on the
adapter, and to an Ethernet port on your computer.
2. Plug the adapter directly into any standard electrical outlet.
Note: The Powerline adapter should be plugged directly into a wall
outlet, not into a power strip or surge suppressor. Power strips and surge
suppressors can weaken or block the Powerline network signal.
Corinex HD200 Powerline Wall Mount F
Installation Guide
11