Scheduled Maintenance; Accessories - Solo 635 Instruction Manual

11.10 Scheduled maintenance

The following information is based on standard operating conditions.
For special conditions, such as prolonged daily use, the recommended maintenance
intervals should be reduced accordingly.
Implement all maintenance jobs regularly. If required, authorise a specialist service
centre to maintain the machine for you. The owner of the machine is responsible for:
• Any damage caused by a lack of maintenance, incorrect or late maintenance and
repairs
• Consequential losses - including corrosion - from incorrect storage
Complete machine
Guide bar
Saw chain
Chain brake
Chain lubrication
Silencer
Carburettor
Air filter
(pre-filter and main air filter)
Spark plug
Fuel tank, oil tank
Fuel filter
All accessible screws
(except for adjusting screws)
Other control elements
[stop switch, throttle control, throttle
control lock, choke part throttle
stop, starter]
The next three pages are abbreviated extracts from our general 2007 catalogue. If you require a copy of the full
catalogue, please contact your specialist SOLO dealer or visit our website at www.solo-germany.com.
Operating and maintenance information; Accessories
Visual inspection
Clean (incl. air inlet, cylinder cooling fins)
Visual inspection
Reverse the blade
Lubricate the guide sprocket
Clean the chain groove / oil bore
Clean the blade cover on the inside
Visually inspect condition, check sharpness
Re-sharpen
Renew, possibly renew the sprocket as well and
lubricate the sprocket bearing
Functional test, check for ease of operation
Clean, lubricate joints
Check
Visual inspection of condition – check tightness
of screws/bolts
Check idling speed
Adjust idling speed
Clean
Replace
Check the electrode gap and adjust, if required
Replace
Clean
Replace
Retighten
Check function

12. Accessories

X
X X X
X
X
X
X
X
X
X X
X
X
X X
X
X
X
X
X
X
X
X X
X
X X X
X
ENGLISH 21
X
X
X