Section II. General Specifications
Standby Temperature
AC Input Requirements
Alarm Limits
Alarm Output (Audible)
Alarm Output (Visual)
Output Connector
Communication Capacity
200 deg F (93 deg C)
240 Vac +10% -20%, 48-63 Hz
(standard)120 Vac (Available)
+/- 30 deg F (17 deg C) when used
with an IMP
Over Temperature: 2 KHz tone at
Under Temperature: 1 KHz tone at
Over Temperature: 2 Hz flashing
Under Temperature: 1 Hz flashing
AMP MIL-style connector (4 Pin)
providing Normally Closed and
Normally Opened relay contacts.
(5 amps maximum)
50 zones maximum
16
2 Hz interval
1Hz interval
rate
rate