Aggregation/ Trunk Configuration - PCI SWP-0412G2 Series User Manual

SWP-0412G2 Series L2 Web Smart Switch User Guide

Aggregation/ Trunk Configuration

To set up the port trunk groups, put the selected ports' numbers into the same
Aggregation group. You can choose up to eight groups. Don't forget to click "Apply" to
save the settings.
There are three aggregation modes for you to set up, SMAC, DMAC, and XOR.
SMAC mode selects the path of packets according to Source MAC while DMAC
mode selects path according to Destination MAC. XOR mode calculates the result of
the DMAC and SMAC modes to decide the path of the packets.
Note:
1. Settings in VLAN, Port Aggregation, and Mirror are co-dependent. Please
make sure that the settings won't influence one another.
16