Muting The Microphone; Troubleshooting And Maintenance - Uniden BT-109 User Manual

While the call is ringing, press Power .
Answer a call
Press Power .
Hang up
During a call, press and hold Power for 2 seconds. The headset sends the
Send a call back
to your phone. call to your phone and disconnects from the phone.
Press and hold Power for 2 seconds; when you hear a beep, release the
Reject an
incoming call
button.
Redial the last
Press and hold Volume Down ; when you hear 4 beeps, release the button.
dialed number
With the phone in standby, press Power and release. When you hear a beep,
Activate voice
start using your phone's voice commands. (Your phone must support voice
dialing
dialing, and all voice commands must already be programmed.)

Muting the microphone

To mute the microphone so the caller can't hear you, press and hold both
Volume Up Volume Down
and
periodically to remind you that the microphone is muted. Press and hold
the buttons again to turn the microphone back on.

Troubleshooting and Maintenance

If you have problems with the headset, see the suggestions in the table
below. If these suggestions don't help, contact customer support (see
the front cover for contact information).
for about one second. The headset will beep