3. While holding down the buttons, press the Power button to switch the NION back on.
This menu will be displayed.
OPTIONS:
> WHEEL TO EDIT
> ATTN TO BOOT
UPDATE MEDIA
4. Turn the wheel clockwise until BOOT MODE is displayed.
5. Push the wheel button.
6. Turn the wheel to select QUIET, then push the wheel button to select the option.
7. Press Attn.
The NION will boot. You will then be able to erase the role without running it.
8. Reboot the NION.
The NION will start in NORMAL boot mode.
September 30, 2010
Version 1.6.1.0
NION Hardware Manual
67