Front Panel Led Indicators - Peavey MediaMatrix NION Hardware Manual

Programmable digital audio processing node
Hide thumbs Also See for MediaMatrix NION:
Table of Contents

Advertisement

5. Press Enter.
To specify a static IP address
1. Type
2. Type
3. Type
4. If you want the settings to be saved and used each time the NION boots, type
press Enter.
If you omit this step, the settings will only be used for the current session.
5. Type
To specify an IP address automatically using DHCP
1. Type
2. If you want the settings to be saved and used each time the NION boots, type
press Enter.
If you omit this step, the settings will only be used for the current session.
3. Type
Some examples
Scenario
The NION is configured with a static IP
address, but you want to assign a new
address that is temporary.
You want to use DHCP for this session and
each time the NION boots.
You want to use a static IP address for this
session and each time the NION boots.

Front panel LED indicators

There are several LEDs on the NION front panel that help indicate unit status.
Fault
RED
OFF
September 30, 2010
and press Enter.
setenv dhcp no
setenv ipaddr <IP address>
setenv netmask <subnet mask>
and press Enter.
boot
and press Enter.
setenv dhcp yes
and press Enter.
boot
Audio not working.
Audio working.
Version 1.6.1.0
and press Enter.
and press Enter.
Command to use
setenv ipaddr 10.1.10.100
setenv netmask 255.255.0.0
boot
setenv dhcp yes
saveenv
boot
setenv dhcp no
setenv ipaddr 10.1.10.100
setenv netmask 255.255.0.0
saveenv
boot
NION Hardware Manual
and
saveenv
and
saveenv
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents