Vivitar DVR-530 User Manual page 64

Shooting
Symptom
Even if I press the shutter
button, the DVR-530 does not
shoot.
Images do not appear on the
LCD monitor.
The flash does not fire.
The flash cannot recharge.
EN-64
Cause
The battery is running low.
The power is not on.
The DVR-530 is not in shooting
mode.
The shutter button is not pressed all
the way.
The internal memory or memory card
does not have any free space.
End of memory card life.
The flash is recharging.
The memory card is unrecognized by
the DVR-530.
The auto power off function is activated.
The power is not on.
The LCD monitor is dark.
The DVR-530 is set to
The flash is set to flash off.
Measure
Recharge the battery.
Turn the power on.
Slide the mode switch to shooting
mode.
Press the shutter button all the way.
Load a new memory card, or delete
unwanted files.
Load a new memory card.
Wait until the system LED off.
Format the memory card in this DVR-
530 before its first use or when it
was used other than this DVR-530.
Turn the power on again.
Turn the power on.
Adjust the brightness of the LCD
monitor in the SYSTEM MENU.
mode. Set the focus switch to
Set the flash to something other
than flash off mode.
position.