Main Menu → Time/Date → Set Region
o
Use this menu option to set the region for the Auto
Daylight Savings Time feature. Choices are:
•
OFF: Clock will not be changed automatically.
•
USA: DST starts at 02:00 on the first Sunday in
April. DST ends at 02:00 on the last Sunday in
October. Includes: United States (except Hawaii,
American Samoa, Guam, Puerto Rico, Virgin
Islands, parts of Indiana and Arizona) and
Canada (except Saskatchewan).
•
EUR: DST starts at 01:00 GMT on the last
Sunday in March. DST ends at 01:00 GMT on
the last Sunday in October. Includes: European
Union Countries.
•
AUS: DST starts at 02:00 on the last Sunday in
October. DST ends at 03:00 on the last Sunday
in March. Includes: South Australia, Victoria,
ACT, NSW. Excludes: Tasmania.
The clock will only be automatically adjusted once on a given time and date. If you manually set the
clock back before the last DST change, the time will not get automatically adjusted again for that same
time change.
4.2 Main Menu → Alarms
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether the internal buzzer is activated during an
alarm condition.
4.3 Main Menu → Timer Settings
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
•
The date, or days on
which the recording
will occur.
•
The start and stop
time.
•
The record speed.
•
The record quality.
•
Whether the event is
enabled.
0150-0255C
DATE
START
STOP
31
16:45
17:05
Sat
07:55
08:10
Mon-Fri
09:56
11:05
Sat-Sun
14:23
14:50
Mon-Sun
02:23
03:34
--
--:--
--:--
EDIT Mode
4-3
Regional Settings
Daylight Saving :
Time Zone
:
SUN,
6 APR 2003 02:00 (+1)
SUN, 26 OCT 2003 02:00 (-1)
[CANCEL]
[OK]
Alarms Menu
Hardwire Alarm :
Alarm Buzzer
[CANCEL]
SPD(pps)
QUALITY
20
High
10
Med
60
Low
60
High
20
Med
--
--
[OK]
Hit "ENTER" To Toggle EDIT Mode
USA
GMT+07:00
Enable
:
Enable
[OK]
ON/OFF
On
Off
On
On
Off
--
Kalatel VDR
Need help?
Do you have a question about the Kalatel 0150-0255C and is the answer not in the manual?
Questions and answers