GE Interlogix Kalatel 0150-0255C User Manual page 14

To Use a CF card:
1. Stop all recording or playback operations on the VDR.
2. Insert the CF card into the CF card slot with the label (top) facing to the right. Slide in the card
until it is firmly seated in the socket. The following message will appear.
4. When this message disappears the CF card is ready for use. The first time a CF card is used
we recommend that the card be formatted using the Format command in the Main Menu under
Compact Flash. The Format command places a FAT16 file system on the CF card. Please note
that formatting the CF card permanently erases any data currently stored on that card.
5. Once Formatting is complete the CF card will be ready for use. For detailed information on the
Storage and Retrieval of data, please see Section 4.6 Main Menu → CompactFlash.
6. Once operations are complete remove the CF card by grasping it with your thumb and forefinger
and pulling it out of the CF card slot.
Kalatel VDR
Compact Flash
Compact Flash detected. Initializing...
1-10 0150-0255C