Table of Contents
Advertisement
Quick Links
Tri-Vista
PREAMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
Tri-Vista Pre remote control preamplifier.
Used properly and carefully, it should give you many
years of outstanding musical reproduction.
Aesthetically, the Tri-Vista Pre is a perfect match for the
Tri-Vista Power amplifier and Tri-Vista SACD player,
which are part of our 20th Anniversary series.
Together, they form one of the finest hi-fi systems available today.
Dust regularly with a soft duster or soft brush but be
careful when using cleaning or polishing agents - they may
harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.
Tri-Vista Pre
Instructions for Use Page 1 of 11
Issue 1: April 2003
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Musical Fidelity kWP
Summary of Contents for Musical Fidelity kWP
- Page 1 Tri-Vista Pre remote control preamplifier. Used properly and carefully, it should give you many years of outstanding musical reproduction. Aesthetically, the Tri-Vista Pre is a perfect match for the Tri-Vista Power amplifier and Tri-Vista SACD player, which are part of our 20th Anniversary series.
-
Page 2: Safety Information
Any modifications to this product not expressly approved by Musical Fidelity who is the party responsible for standards compliance could void the user’s authority to operate this equipment. Tri-Vista Pre Instructions for Use Page 2 of 11 Issue 1: April 2003... -
Page 3: General Advice
Heed all warnings shown on the back of the product. Only connect the Tri-vista Pre-amplifier to a mains outlet having the same voltage as marked at the back of the unit. - Page 4 (see page 7) - two per channel Power supply input socket Low voltage ouput socket to power supply Low voltage input socket from power supply Phono earth connection Tri-Vista Pre Instructions for Use Page 4 of 11 Issue 1: April 2003...
-
Page 5: Power Supply
Left power supply fuse Low voltage power supply output Low voltage power supply input Right power supply output Left power supply output Mains inlet - 16 Amp IEC type Tri-Vista Pre Instructions for Use Page 5 of 11 Issue 1: April 2003... -
Page 6: Remote Control
AUXILIARY input select RIAA / IEC pickup compensation VOLUME (UP) (see page 9) VOLUME ( DOWN DISPLAY brightness adjustment MUTE TAPE MONITOR (see page 8) (see page 9) button Tri-Vista Pre Instructions for Use Page 6 of 11 Issue 1: April 2003... - Page 7 TAPE RECORDER CONNECTION (up), the input impedance is 68K Ohms in par- allel with 47pF. The Tri-Vista Pre has a single tape circuit with When each individual lever is moved down- facilities for off-tape monitoring with 3-head wards, loading of the MM phono input circuit tape decks (see page 8).
-
Page 8: Operation
STARTING source with the input selector knob on the front panel. This source will now be routed to the Tri-Vista Pre’s TAPE RECord out- Press the power button on the power supply front. The blue power LED above the but-... -
Page 9: Operation And Display
Your Tri-Vista Pre-amplifier has independ- ent circuits for moving magnet (MM) and moving coil (MC) phono pickups. To VOLUME ADJUSTMENT obtain the preferred input, the selector knob must first be in the PHONO position. - Page 10 If none of these actions effect a cure, please contact your dealer, or an authorised Musical Fidelity service agent. Remember, never open the case of the Tri-Vista Pre-amplifier yourself, as this will invalidate the guarantee.
-
Page 11: Specifications
2 batteries size LR06 or AA, manganese alkaline Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice. Tri-Vista Pre Instructions for Use Page 11 of 11 Issue 1: April 2003...
Need help?
Do you have a question about the kWP and is the answer not in the manual?
Questions and answers