Motorola Symbol LS4278 Quick Reference Manual page 14

Quick Reference Guide
Radio Communications Host Types
Scan a bar code below to choose how the scanner connects to a remote device.
Scan Cradle Host if connecting to the Symbol STB4278 cradle.
CRADLE HOST
SERIAL PORT PROFILE (SLAVE)
Pairing
When the scanner is configured as an SPP or HID Master, a 'pairing bar code'
must be created for the remote Bluetooth device to which the scanner can
connect. The Bluetooth address of the remote device must be known. Pairing bar
codes are Code 128 bar codes. The format is: <Fnc 3>Bxxxxxxxxxxxx (where
xxxxxxxxxxxx represents the 12-character Bluetooth address).
Pairing Modes
When operating with the cradle, two modes of pairing are supported:
• Locked Pairing Mode - When a cradle is paired (connected) to the scanner,
any attempt to connect to a different scanner, by scanning the pairing bar code
on the cradle or by inserting it into the cradle with Pairing on Contacts
enabled, is rejected. The currently connected scanner maintains its
connection.
• Unlocked Pairing Mode - A new scanner can be paired (connected) to a
cradle at any time by scanning the pairing bar code on the cradle or by
inserting it into the cradle with Pairing On Contacts enabled. The original
scanner is disconnected from the cradle in favor of the new one (Point-to-Point
mode only).
SERIAL PORT PROFILE (MASTER)
BLUETOOTH KEYBOARD EMULATION
(HID SLAVE)
13