Table of Contents
Advertisement
Unpacking
Check the package for visible damage. If any items appear to have been damaged
in shipment, notify the shipping company. Unpack carefully. This is electronic
equipment and should be handled with care to prevent damage to the unit. Do
not attempt to use the unit if any components are damaged. If any items are
missing, notify your Customer Service Representative or Philips CSI Sales
Representative.
The shipping carton is the safest container in which to transport the unit. Save it
and all packing materials for future use. If the unit must be returned, use the
original packing materials.
Package contents
Check for the following items:
• Digital Video Recorder (Divar 16, Divar 9 or Divar 6 unit)
• Quick reference guide
• Divar operation manual
• Divar Control Center and Archive Player operation manual
• Installation manual (this manual)
• A 25-pin D-type connector board with screw terminals (used for switching
and alarm connections)
• A 15-pin D-type connector board with screw terminals (used for PTZ
connections)
• Power supply cord
• Network cross-over cable
• Serial RS232 cross-over (null-modem) cable
• Divar loop-through cable
• Rack mounting kit
• A CD-ROM with the software and the manuals.
Philips Communication, Security & Imaging
Installation Environment
The Divar is supplied as a desktop unit. If desired, the unit may be
Mounting:
rack mounted using the rack mounting kit supplied with the unit.
Ensure that the location planned for the installation of the unit is
Ventilation:
well ventilated. Take note of the locations of the cooling vents in the unit's
enclosure and ensure that they are not obstructed.
Observe the unit's ambient temperature specifications when
Temperature:
choosing an installation space. Extremes of heat or cold beyond the specified
operating temperature limits may cause the unit to fail. Do not install the unit
on top of hot equipment.
Ensure that the site's AC power supply is stable and within the
Power Supply:
rated voltage of the unit. If the site's AC power is likely to have spikes or power
dips, use power line conditioning or an uninterruptable power supply (UPS).
Introduction
1-3
Advertisement
Table of Contents
