Table of Contents
Advertisement
ALARM LOG
With the DVR system, the camera frames will keep flashing in red and sending out the alarm when
alarm event happens.
The Alarm Log provides the administrator of the DVR with a detailed log of the alarm incident, including
the reason for the alarm (which camera sent out what kind of alarm), the time the alarm was triggered
and the description of the alarm triggering event. Thus you can handle the entire alarm status
conveniently.
The log is simple and allows the administrator only two options:
(a)
to delete a single log.
(b)
to delete all log files.
Follow the next few steps to set this up:
Deleting One Log
1.
Click the "Alarm Log" Tab.
2.
Select the file you wish to delete.
3.
Click "Del"
4.
A confirmation pop-up screen will appear asking you to reconfirm.
5.
Click "Confirm"
6.
Click "Apply"
button.
to continue or "Cancel"
, then "OK"
to complete the task.
Figure 9-1: Alarm Log / Selection File
Figure 9-2: Confirmation Window
to reset.
40
Chapter 9
Advertisement
Table of Contents
