Table of Contents
Advertisement
SYSTEM SETTINGS
The System Settings Panel is the main window for naming and setting basic configurations for the DVR.
These very important settings make sure that the DVR system may be correctly viewed both locally and
remotely. Incorrect system configuration may result in abnormalities in the system, which could make
tech support more complex and time consuming. Follow these steps to set up your DVR machine(s).
1.
Click the "Setup" Icon on the Main Screen.......................................................................
2.
Click the "System" Tab.
Note: NAS, NTP, and Audio are optional, please read the Appendix to understand the operating steps.
3.
Type in a name for the DVR host (up to 32 letters) for the purpose of machine identification when sending
an email alarm.
4.
Enter the Host's IP Address, Subnet Mask, DNS Server and SMTP of Internet field. Connecting the
Internet via LAN, please check "LAN" and key in the "Default Router" that your Administrator has
assigned to you.
5.
Click "Apply"
, and "OK"
.
25
Chapter 7
Figure: 7-1: System Tab
Advertisement
Table of Contents
