Table of Contents
Advertisement
CONFIGURING THE CAMERAS
This chapter explains how to set and configure the cameras connected to your Digital Video Recorder.
Once you have connected the video cameras you need to your DVR, you need to enter the Setup Menu
to configure each individual camera. Here users can select the camera information shown on-screen,
set the background colors, adjust the lighting of each camera, set the image format and resolution,
change the image quality, frame rate, and adjust the sensitivity of motion detection.
Please follow these steps to change the settings of each camera:
1.
Click the Setup Icon on the Main Screen to enter the camera settings screen....................
2.
Click the Diamond Icon to choose the camera you want to configure.
3.
The small window under the camera selection will then display the selected camera in real-time mode.
Naming Cameras
• If the selected camera has been set up, while having not started working, a grey screen will be shown. You
should click the checkbox under "Cam Info" to enter a name for the camera to start the camera screen.
• If you start a camera before its installation, this camera will display NO SIGNAL in blue, and this
condition will waste system resources. So don't enable a camera before installing it.
Figure 4-1: Main Camera Settings Window
Figure 4-2: Camera Naming Field
16
Chapter 4
Advertisement
Table of Contents
