Table of Contents
Advertisement
WARNING!
A 5
A t 0
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture.
Dangerous
high voltages are present inside the enclosure.
To prevent electrical shock, do not
open the cabinet.
The lightning flash with arrowhead
symbol within and equilateral
triangle is intended to alert
the user to the presence
of uninsulated
"dangerous
voltage" within the product's
enclosure
that may be of sufficient magnitude
to constitute
a risk of electric shock to persons.
The exclamation
point within and equilateral
triangle is intended to
alert the user to the presence of important
operating
and maintenance
(servicing) instructions
in the literature accompanying
the product.
CAUTION
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
This unit employs a laser system. To ensure the proper use of the unit, read this manual carefully and keep it for
future reference.
If the unit requires servicing, contact the retailer and or Blaupunkt service center - see "Limited
Warranty Information".
To prevent direct exposure to the laser radiation, do not open the cabinet or back of the unit.
NOTE:
This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rule. These limits are designed to provide reasonable
protection
against harmful interference
in a
residential
installation.
This equipment
generates,
uses, and can radiate radio frequency
energy and if not
installed and used in accordance
with the instructions,
may cause harmful interference
to radio communications.
However, there is no guarantee
that interference
will not occur in a particular
installation.
If this equipment
does
cause harmful interference
to radio or television
reception,
which can be determined
by turning the equipment
off
and on, the user is encouraged
to try to correct the interference
by one or more of the following
measure:
* Reorient or relocate the receiving antenna
* Increase the separation
between the equipment
and receiver.
l
Connect the equipment
to an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced
radio/TV technician
for help.
-2-
Advertisement
Table of Contents
