Table of Contents
Advertisement
3. Exit from menus.
n
Press direction
buttons and )
(PLAY) to select the relevant exit
column.
n
Press the direction
buttons
A, ) to
exit from "DUAL MONO".
n
Press the direction button 7 to select
"MAIN PAGE", press b(PlAY)
to
exit from the current column and
return to the main menu.
The screen shows:
TV Display
1.4:3lPS
This is selected when the unit is
connected
to a normal TV Wide-screen
images are shown on the screen, but
with some oarts cut automaticallv.
N Time
You may select according
to the color
system of the TV/monitor
to be
connected.
n
Select "AUTO" for a multi-system
TV/monitor.
n
Select "NT%"
for ra NTSC
TV/monitor.
(US)
w Select "PAL" for a PAL TV/monitor.
Angle Mark
This only works when there is an angle
mark on the disc.
n
Select "ON" , the screen shows the
mark when playing DVD.
n
Select "OFF" , the mark is not
shown.
Captions
n ON
The hidden subtitle is shown.
n
OFF
The hidden subtitle is turned off.
The screen shows:
SETUP MENU -- MAIN PAGE
,/GENERAL
SETUP]
b DOLBY DIGITAL SETUP
b PASSWORD
SETUP
b PREFERENCES
EXIT SETUP
n
Press A ,v to select "EXIT SETUP" ,
then press ) (PLAY) to exit from the
menu setting.
2.4:3/LB
This is selected when the unit is
connected
to a normal TV Wide-screen
images are shown on the screen, with
black belt on the top and bottom.
Screen Saver
Start the screen saver, the screen
saver image appears when the unit
stops or the image is frozen for a few
minutes. This saver can keep the
screen from being damaged.
n
ON: Start the screen saver.
n
OFF: Remove the screen saver.
DOLBY DIGITAL SETUP
The setting structure is:
--DOLBY
DIGITAL SETUP PAGE--
:
COMPRESSION
>> LINE OUT
DUAL MONO >> STEREO
LEFT MONO
RIGHT MONO
MIXED MONO
DYNAMIC
RNG
es
FRONT SPEAKER >> STEREO Lt/Fft
MAIN PAGE
Compression
n
LINE OUT: Compress
input signals
linearly.
-16-
GENERAL
SETUP
The setting structure is as follows:
GENERAL SETUP PAGE
TV DISPLAY >>
4:3/PS
4:3/LB
16:9 WIDE
TV TYPE >>
PAL
AUTO
NTSC (US)
ANGLE MARK >>
ON
OFF
CAPTIONS >>
ON
OFF
SCREEN SAVER >> ON
OFF
MAIN PAGE
3. 16:9 WIDE
This is selected when the unit is
connected
to a wide-screen
TV
Dual Mono
This is the output mode of the L and R
signals of the set audio output. If it is
set to "MIXED MONO", the function
only works when the DVD being played
is 5.1 channel.
Dynamic
Range
When the compression
mode is set to
"LINE OUT", this is selected to adjust linear
compression
rate to obtain the different
compression
results of the signals.
Front Speaker
n
STEREO Lt/Rt
Select this when you play a disc with
dolby Pro Logic stereo, the disc signals
can be decoded
by the unit and be
reproduced
the realistic theater effects
in your room.
n
STEREO
Select this, the audio output is
produced
as an ordinary stereo
signals.
Advertisement
Table of Contents
