Troubleshooting And Status Led; Led Codes - Audiophilleo Audiophilleo1 Owner's Manual

A U D I O P H I L L E O 1 & 2
Troubleshooting
and Status LED
T
he Audiophilleo1 and 2 are equipped with an LED which provides various
status messages to the user. In addition, the Audiophilleo1 may temporarily
display status or error messages in lieu of the volume display on the main
screen. Note that under normal operating conditions these messages and
LED patterns may be ignored.

LED Codes

When first plugging in the device, the LED will immediately flash very briefly. After
this first flash, the LED will display status or error messages.
The LED is normally off and displays codes by flashing (much like Morse code).
There are 2 flash durations:
 L=long (1 seconds)
 S=short (.3 seconds)
A message is displayed by producing a sequence of L and S flashes.
The LED is normally off. When no LED codes are being displayed, the LED will do
an S, SS, or SSS flash once every ~5 seconds. This is the device heart beat and signifies
normal operation. The meaning of these is:
 S
- Audio is playing
 SS
- The output stage is active and SPDIF signal is generated.
 SSS
- The output stage is inactive and no SPDIF signal is generated.
U S E R M A N U A L
16
4
Chapter