Cleaning And Care - Kompernass dentalux DAZ 2.4 A1 Operating Instructions Manual

Cleaning and care

Warning:
First remove the plug from the mains power socket before
cleaning the charging station 3. There is a risk of receiving
an electric shock!
• NEVER open the housing of the charging station 3 or the
toothbrush! They cannot be resealed in a water-tight manner.
• Clean the charging station 3 only with a soft, lightly
moistened cloth. Do not use detergents or solvents. They
can damage the plastic surfaces.
• Remove the brush head 1 from the hand element. After
use, clean the brush heads 1 thoroughly under running water.
We recommend cleaning the brush heads 1 in a standard
commercial cleaning fl uid for dental prosthetics every 2 - 4
weeks. After about 3 months, at the latest however when
the bristles bend outwards, you should fi t a new brush head 1.
• Clean the drive shaft on the hand element, into which the
brush head is inserted, under running water. Hold the hand
element so that the water from the top can drip out of the
rear outlet openings:
- 9 -