Controls And Indicators; Disp - Jensen VM9312HD Installation And Operation Manual

VM9312HD

CONTROLS AND INDICATORS

Button Operation
1. OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT.
2. WIDE/DISP
Press to adjust the display aspect of the picture to one of two
settings: Full or Normal.
With the monitor closed, press the DISP button to cycle
through information available on the LCD screen.
When the NAV101 is connected to the VM9312HD, press
and hold to display the navigation user interface. The TFT
screen must be open for this function to operate.
3. PICTURE/AS
Press to adjust the Brightness and Contrast. Press the
AUDIO button (5) to move between Brightness to Contrast.
Turn the rotary encoder (5) to adjust the setting for the
selected option.
Press and hold the AS button to automatically store strong
radio stations in the preset channels for the current band.
4. TILT/BAND
Press to activate the tilt function. Use the joystick to make
adjustments while the red tilt icon is flashing. Press once to
adjust the downward tilt angle of the screen one step at a
time or press and hold to adjust the angle in a continuous
motion.
With the monitor closed, press the BAND button to change
the AM, FM or SAT band.
5. AUDIO
Rotate to adjust the volume. Press and release to enter and/
or confirm audio settings.
6. SRC
Press once to select playing mode.
7. LCD Display
8. MUTE
Press to silence the receiver. Press again to resume previous
volume level.
NOTE: The VM9312HD features Softmute, which will
allow the volume to increase or decrease gradually when
the MUTE function is activated or deactivated.
4 3
BAND AS
TILT PICTURE
VM9312HD
PRESS AUDIO
5
SRC
9
6
6
2 1

DISP

OPEN
WIDE CLOSE
SAT
READY
EJECT
MUTE
10
8
7
17
160
Watts
16
15
14
13
11 12