Calibrating With Scanner; Calibrating With Spectrocam - Dell KY0730481 Installation And Startup Manual

Calibrating with Scanner

1. Place the calibration form on the platen of the DocuColor 12 and click Calibrate.
2. If the calibration is successful, the screen display says, "The calibration process was successful.
You may now calibrate another media."
3. Click OK to go back to the calibration window.
Notes:
•
If the user checks the "Apply this calibration to all media types," the same calibration will be
applied to all supported media types. This is not recommended for users with color critical
jobs. Color critical jobs should have each media calibrated separately using the
recommended Xerox Color Xpressions media.
•
If the calibration process fails, check to make sure the test page is properly positioned on the
platen. The scanable area is 11"x 17". If the calibration test form is outside this area,
calibration will fail.

Calibrating with Spectrocam

1. Place the test form and ruler on the black scanner plate and position the measurement device on
the first patch on the upper, left corner.
2. Click on the Calibrate button.
If the Spectrocam was not previously calibrated, a prompt directs you to measure/remeasure, the
white reference. Place the measurement device on the white target reference and touch the green
sensor. After remeasuring the white reference, reposition the measurement device on the first
patch on the upper left corner of the test form.
Important Note on Calibrating the Spectrocam: Each Spectrocam needs to be calibrated
against its own unique White Reference Target before taking measurements. The
Spectocam and its White Reference have matching serial numbers. For additional
information, please see the Spectrocam user documentation.
3. Touch the green sensor and move the device slowly across the first row. When you complete the
first row, reposition the Spectrocam over the first patch of the second row and touch the green
sensor again to begin measuring the second row. Continue in this fashion until all rows are read.
Page 32 of 36
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
2003 Kodak Polychrome Graphics. All rights reserved.