Technical Support - Dell KY0730481 Installation And Startup Manual

Matchprint professional server v3.0 for xerox docucolor 12
Table of Contents

Advertisement

Cannot print 12" x 18" test form.
Unable to calibrate 12" x 18" media -
calibration does not stop.
Having difficulty calibrating 12" x 18" media.
Having difficulty with the Matchprint
Professional Server Version 3.0 calibration
process.
White reference does not work in Matchprint
Professional Server RIP calibration
application.
SpectroCam is not reading data correctly and
is difficult to use.

Technical Support

If you have any problems with installation, contact technical support for assistance at 1-800-821-2797.
Page 36 of 36
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
1. Reboot the Matchprint Professional Server server.
2. If still unable to print, restart the DC12. At the RIP
3. Restart the calibration process
1. Cancel the calibration through the Task Manager
2. Power down and Restart the server.
3. Calibrate to normal bond letter size media first.
This is a basic procedure that can be used by all
customers:
If you generally use only bond media or are having
extreme problems with the calibration application,
check the "apply to all" box when calibrating to normal
bond, letter size media. Calibrate to normal bond letter
size media. Next, calibrate with 12 x 18 media. When
setting the 12 x 18 calibration page on the scanner,
offset the page to the right about 1 inch.
CALIBRATION with SpectroCam on DC12 LP
1. Be sure the SpectroCam device in seated squarely
2. Load the SpectroStar SpectroCam software onto
3. Return to the Matchprint Professional Server RIP
1. Reboot Matchprint Professional Server server,
Printer menu, delete the DC12 printer, and then re-
add the printer.
(Ctrl + Alt + Del) and select End Task.
Next, calibrate with 12 x 18 media, when setting
the 12 x 18 calibration page on the scanner, offset
the page to the right about 1 inch.
on the plaque and the plaque is CLEAN.
the server, do the white reference procedure, then
quit.
calibration application and read patch data.
reprint test page (if necessary), and re-calibrate
test page.
2003 Kodak Polychrome Graphics. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Precision 650

Table of Contents