Dell 2407WFP User Manual page 26

Documentation
H Position
NOTE:
V Position
Use the
Sharpness
Use the
Zoom
This feature can make the image look sharper or softer. Use
Horizontal Pan
Use the Zoom function to zoom in to specific area of interest.
Vertical Pan
Using the
After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.
Pixel Clock
Use the
Use the
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main
Phase
OSD menu, by selecting 'Image Settings'.
Use
the
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
Audio Option
NOTE:
Display Info
To turn on or off Audio Power during Power Save mode.
Display Reset
All the settings related to this monitor.
Exit Menu
Reset the image to the original factory setting.
Push
MENU
SETTINGS
http://support.dell.com/support/edocs/monitors/2407WFP/en/setup.htm
Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.
and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
and keys to zoom in and out.
and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
and
buttons to adjust
for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
to exit the OSD main menu.
or to adjust the sharpness from '0' to '100' .
Page 9 of 14
12/10/2007