Dell 2407WFP User Manual page 23

Documentation
VGA
Select VGA input when you are using the analog (VGA) connector. Push
DVI-D
Select DVI-D input when you are using the Digital (DVI) connector. Push
S-Video Select S-Video input when you are using S-Video connector. Push
Select Composite input when you are using composite video connector. Push
Composite
Select Component input when you are using component video connector. Push
Component
Scan for
Push
Sources
Push
Exit Menu
COLOR Color Settings adjusts the color setting mode and color temperature.
SETTINGS
There are different color setting sub-menus for VGA/DVI-D and Video input.
Back Push
To achieve the different color mode for PC and Mac.
Color Settings
Mode
(VGA/DVI-
D)
PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsheets,
Color Adjustm
Programming, Text Editors etc.).
ent
PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Photograph Image
Editing, Multimedia, Movies etc.).
PC Custom: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from '0' to '100'.
NOTE:
'Red') favor blue and red accordingly. Select each one to see how each range suits your eye....or utilize the 'Custom Color' option to
customize the color settings to your exact choice.
Color setting submenu for Video/DVI-HD input
http://support.dell.com/support/edocs/monitors/2407WFP/en/setup.htm
to scan for available input signals.
to exit the OSD main menu.
Color setting submenu for VGA/DVI-D input
to go back to the main menu.
Color temperature is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue' and
to select the VGA input source.
to select the DVI input source.
to select the S-Video input source.
to select the composite input source.
to select the component input source.
Page 6 of 14
12/10/2007