Model Identification; Electrical; Tools - Amana Front Loading Washers Installation And Operating Instructions Manual

Model Identification

Thank you for purchasing this washer. Please read these
Installation Instructions thoroughly. This manual provides
proper maintenance information. Any questions, call the
Consumer Affairs Department at 1-800-843-0304 inside
U.S.A. and 1-319-622-5511 outside the U.S.A.
Complete registration card and promptly return. If
registration card is missing, call the Consumer Affairs
Department. Appliance can also be registered through
out website www.aman.com.
When contacting Amana Appliances, provide product
information. Product information is on the serial plate.
Record the following information.
Serial Plate
Model Number:
Manufacturing Number: _________________________
S/N or Serial Number:
Date of Purchase:
Dealer's name and address: ______________________
________________________________________________
Note: Translation may sometimes cause variations in
meaning. In all cases where meaning varies, the
most accurate meaning will be the English
version of this document.

Electrical

Refer to serial plate for specific electrical requirements.
For more detailed information refer to section on electrical
requirements. Serial plate is located in area shown.
Water
Washer needs two standard
supply faucets with a pressure between 20 –120 pounds
per square inch (138 to 827 kPa). For more detailed
information refer to section on Water Supply
Requirements.
_________________________
_________________________
_________________________
3
/ " (19.05) mm) water
4
Accessories Bag
An accessory bag has been shipped inside your washer.
It includes:
• Two inlet hoses with washers
• Four rubber feet
• Beaded Tie-Down Strap
• Installation and Operating Instructions
• Washing Guide
• Bag for storing shipping materials
• Video
Retain accessories bag to store shipping brace and
shock sleeve for future use when moving washer.

Tools

Tools required:
9 / " wrench or adjustable wrench
16
Screwdriver, Phillips and blade
Level
Pliers
9 / " socket wrenches, and
16
9
Deep Socket / " socket wrenches for rear leveling legs
16
Screwdriver
Wrench
4
5 / " socket wrench
16
Socket
wrench
Pliers
Level
Deep
socket
wrench