Pacvac Prolite Product & Training Manual

10. Operate Right
How to vacuum easier and faster with no back strain.
1. Stand upright, with the bent hand piece section parallel to the floor.
2. Hold the bent hand piece with one hand at a comfortable arm's length.
3. Move forward and away from the power point.
4. Use easy underarm swinging motion when detail cleaning and short dabs when spot
cleaning, always standing upright.
5. Once the end of the power cord has been reached and work completed, return to the
power point along the cord line and disconnect the power cord from the power point.
6. If work is not completed move to the next area, connect power cord to the nearest power
point and repeat steps 1 through 6.
7. Remove back pack by sliding the one of the straps off the shoulder, while raising the other
arm/shoulder to hold strap in place. Slowly lower the shoulder and lower the back pack to
the floor, do not drop.
8. If work is completed disconnect power cord from power point then wind from the back pack
towards the end of the power cord to reduce likelihood of cable twists. In the process check
for nicks, cuts, fractures, and knots.
4
6
14. International Authorised Distributors
INDIA SLOVENIA
Inventa Cleantec Pvt Ltd Klimatehnik d.o.o.
C-31 Sector 63 Brnciceva ulica 13
NOIDA 1231 Ljubljana
Distt. Gautam Budh Nagar 201 301 Slovenia
INDIA Ph: +386 4 180 5004
Ph: + 91 120 2401086 Fax: +386 1 781 6040
Fax: + 91 120 2401087 Web: www.klimatehnik.si
Web: www.inventacleantec.com
SOUTH AFRICA
JAPAN Industro Clean
Bl Corporation 1490 Zeiss Road
6-62-12 Shibayama Lazer Park
Funabashi-shi, Chiba-Ken 274-0816 Honeydew
Japan South Africa 2125
Ph: + 81 47 464 1462 Ph: +27 11 801 4600
Fax: + 81 47 464 1477 Fax: +27 11 794 3504
Web: www.bicorp.co.jp Web: www.industroclean.co.za
NEW ZEALAND UNITED KINGDOM
Proquip NZ Ltd TML International Ltd
47 Fitzherbert Street, Woodlands
Petone Copmanthorpe Grange
Wellington Copmanthorpe
New Zealand York Y023 3TN
Ph: + 64 4 566 7847 United Kingdom
Fax: + 64 4 576 0430 Ph: +44 (0) 1904 744790
Web: www.cleangear.co.nz
Fax: +44 (0) 1904 744010
Web: www.tmlint.com
NORWAY
Viking Cimex AS UNITED STATES OF AMERICA
Prof. Birkelandsvei 24 A-1 TTI Floorcare North America
1081 Oslo 7005 Cochran Road
Norway Glenwillow, OH 44139
Ph: 47 22 79 35 35 United States of America
Fx: 47 22 79 35 40 Ph: +1 440 996 2178
Web: www.skovly.no Fax: +1 440 996 2026
Web: http://ttifloorcare.com
SINGAPORE
Klenco (Singapore) Pte Ltd
18 Gul Crescent,
Singapore 629527
Ph: + 65 6862 3388
Fax: + 65 6861 7575
Web: www.klenco-asia.com
11. Troubleshooting
Caution: Always unplug the back pack before attempting to solve a problem
or when servicing
PROBLEM: CAUSE: SOLUTION:
Back Pack not working Power cord not firmly plugged Check plug is firmly plugged in.
into power point.
Back pack shuts off due to Turn main switch off and unplug
high motor temperature. the back pack. Conduct safety and
maintenance checks found in the
Product and Training Manual or as
per labelling on the machine. After
60 the back pack should be ready
for use. If not contact the number
below for your nearest Authorised
Pacvac Service Agent.
Circuit breaker or RCD has Reset circuit breaker or RCD.
tripped.
Dust bag is full. Remove, empty and clean dust bag.
Back Pack as no/poor
suction
Dust bag not installed Remove and empty dust bag making
correctly. sure the rubber edging is correctly
fitted around the canister.
Hose not installed correctly. Reconnect hose and ensure
correctly sealed.
Blockages. Remove hose, wand and floor tools;
remove any blockages.
Filters blocked. Clean Hypercone HEPA filter and
external motor filter.
12. Service Requirements
Our products are designed and built to be functional and durable. As a result, if you maintain
your vacuum cleaner as instructed, it is unlikely to require servicing. For information on use
and maintenance please read the Product and Training Manual thoroughly. Should you require
servicing we recommend our Pacvac Gold Level Service Centres. For your nearest centre visit
www.pacvac.com, alternatively contact Pacvac on 08 9479 1444 or e-mail sales@pacvac.com.
Support: 08 9479 1444 www.pacvac.com
15. Notes
AUSTRALIA:
For your nearest Australian Retailer/Service Centre contact:
Pacvac Pty Ltd
182 Daly Street, BELMONT, 6104
WESTERN AUSTRALIA, AUSTRALIA
Ph: + 61 8 9479 1444
Fax: + 61 8 9478 5444
Email: sales@pacvac.com
Web: www.pacvac.com
Support: 08 9479 1444 www.pacvac.com
13. Parts Profile
Product Number: 201006-002A
1 25
26
24
2
10
3
4
27 28
11
30
29
14
12
5
13
15
18
31
16
6
17
32
7
19
21
20
22
8
23
Part No. UA908W Part No. KC909
Combination floor Extendable wand
9
tool with wheels
Optional Extras
Part No. UA908 Part No. UA9272 Part No. UA917H
Combination floor tool Bottom plate to suit All purpose floor tool
combination floor tool
Part No. UP112PB Part No. UA926 Part No. UA913M
Plug in RCD adaptor Turbo head Metal bent hand piece
NOTE: Not suitable for
commercial use
Service & Help
For service and help contact Pacvac on 08 9479 1444
or visit our website at www.pacvac.com for a list of your nearest
Gold Level Retailers and Service Centres.
Revised: January 2013
Quote these part numbers when ordering spare parts
No. Part Name Part No.
1. Dome lid KC251
2. Dust bag flat bottom P502
3. Prolite filter (Packet of 5) KC522A5
4. Filter retainer KC522
5. Main vacuum canister KC252P
6. Motor gasket foam KC253B
7. Motor 240v 1300W single stage flow through G118
8. Motor spacer KC253S
9. Motor gasket KC253
10. Intermediate noise insulation P254
11. Intermediate housing KC256P
12. Switch rocker 12A 250V 5E4 VS261
13. Screw pan plastite 5x20 N/A
14. Noise insulation motor P255
15. Noise insulation bottom lid P255B
16. Screw pan plastite 3x12 PV299
17. Cable clamp KC262
18. Motor filter cage KC264
19. External noise insulation P259
20. Screw ST 6x25 N/A
21. Bottom cap KC258
22. Cable grommet KC406
23. Power cord 15m 10A 2c 1mm2 (AU, NZ) KC111
Power cord 15m 10A 2c 1mm2 (UK, SG, IN, AE) KC108UK
Power cord 15m 10A 2c 1mm2 (EU) KC108EU
24. Bolt 5x20 N/A
Nut 5mm nyloc N/A
Washers 3/16 x3/4 & 3/16 x7/16 N/A
25. Carrying frame KC120
26. Shoulder strap pair KC121
27. Cord restraint KC268
28. Back support padding KC263
29. Hose complete 32mm 1.2m KC32PRO
30. Two piece wand KC9092
31. Crevice tool KC911
32. KC floor tool KC908W
Specifications
Volts / Frequency: 220-240V~50Hz
Motor: 1300W Single Stage Flow Through
Noise Level: 66dB(A) ± 3dB(A) (at 1.5m)
Filtration: 3 stage
Airflow Volume: 39 litres per sec
Tank: Capacity: 6 litres
Weight: 4.6kgs (excluding power cord and hose)
Support: 08 9479 1444 www.pacvac.com
Commercial Back Pack
Vacuum Cleaner
Support: 08 9479 1444
www.pacvac.com
Read the instruction manual before using the machine.
Retain for future reference.
Original
Instructions