Pioneer CT-S670D Service Manual page 37

(5) Mechanism Operation Check
Operations specifications
Input Key FL Display
STOP 10
(6) Mechanism SW Check, CD Synchro Check
Entering the check mode
When the mechanism operation check mode, press the MODE key.
Exiting the check mode
When the STOP key is pressed, mechanism operation check mode is set.
Operations specifications
Input Key FL Display
MODE 20
DIGITAL/CD CD SYNC
SYNCHRO
(7) Automatic Adjustment
For details, refer to " 6. ADJUSTMENT ".
Entering the check mode
When the mechanism operation check mode, press the XD FLAT key.
Exiting the check mode
When the STOP key is pressed, mechanism operation check mode is set.
Operations specifications
Input Key FL Display
STOP 10
XD FLAT 80
REC
STOP TUNE
The Mechanism operates without the cassette half in this mode.
Cassette Half SW Check
When there is a cassette half, counter shows "H" at the second digit from the left.
Accidental Erasure detection SW Check
FWD recordable: " 3 " lights up
Timer SW Check
TIMER REC : REC indicator lights up
OFF :
TIMER PLAY : PLAY indicator lights up
Tape Type Check
When there is a tape, display is made at the first digit from the left on the counter.
NORMAL TAPE : " n "
CrO2 TAPE : " C "
METAL TAPE : " M "
CD Synchro Check
When the cord whose input and output are short- circuited is connected,
and the DIGITAL/CD SYNCHRO key is pressed, " CD SYNC " display lights up.
1 Memory data will be cleared when the MODE key, PAUSE key and MUTE key are pressed together.
2 Enter the mechanism operation check mode
3 Enter the automatic adjustment mode
4 Execute adjustment of recording bias and recording level.
End of adjustment
Bias adjustment error
Recording level adjustment error : " R " lights up
5 Exiting the automatic adjustment mode: " TUNE " lights up
Adjustment and Check
Adjustment and Check
Adjustment and Check
: " BR " lights up
: " B " lights up
CT-S670D
37