Table of Contents
Advertisement
EdgeMarc 4500 SOHO Router Installation Guide
F
Erase Button
Name
If pressed twice in quick succession, only the CLI password will be
changed back to it's original password.
If pressed three times in quick succession, the EdgeMarc will
revert back to the factory default settings. This will reset all
passwords and erase all prior configurations. The default LAN
address will be set to 192.168.1.1.
Caution
Using the Erase button as outlined above means any
configuration made to the EdgeMarc 4500 will be lost.
Additionally the VoIP ALG registration code must be re-
entered in the EdgeMarc 4500. Erasing the configuration
means that IP phones installed behind the EdgeMarc 4500
will not work and Internet connectivity or network access for
PCs will be down until the system is reconfigured.
Description
6
Advertisement
Table of Contents
