Brother S-1110A Instruction Manual page 13

0005Y
0006Y
S-1110A
5. INSTALLATION
3. Return the machine head to its
original position, and then remove
the screw (4) from the rear of the
machine head.
4. Align screw (1)-B with the groove
(6) in belt cover U (5), and then
place belt cover U (5) onto the
machine pulley.
5. Tighten screws (1)-B, (1)-C and (4)
to secure belt cover U (5).
6. Place belt cover D (7) so that it
overlaps the belt cover (2) by 2 - 3
mm, and then provisionally tighten
the two screws (8).
(Continued on next page)
6