Mic; Line In; Aux In; Sub Out - Technics SX-KN7000P Service Manual

(Right side)

MIC

A microphone can be connected to this terminal.

LINE IN

This terminal receives input signals from an ex-
ternal instrument. To receive a monaural signal,
connect to the R/MONO terminal.
The input signal volume can be adjusted using
the LINE IN VOLUME controller on the control
panel unit.
Block diagram
MIC
LINE IN
USB (IN)

AUX IN

MONITOR SETTING
Sound generator
AUX IN
This terminal receives input signals from an ex-
ternal instrument. To receive a monaural signal,
connect to the R/MONO terminal.
The input signal volume is not affected by the
instrument's MAIN VOLUME setting.

SUB OUT

The sounds from desired parts can be output
independently from those terminals.
MAIN OUT
The total sound of this instrument can be output
from this terminal.
MAIN
VOLUME
MONITOR
SETTING*
SUB OUT
USB (OUT)
LINE OUT
MAIN OUT
(Speakers &
Headphones)