Removing The Bend And The Hp P.c.b. - Technics SX-KN7000P Service Manual

-
Remove the SDSW P.C.B. mounting screws (

7.8. Removing the BEND and the HP P.C.B.

-
Remove the top cabinet (see step
BEND P.C.B.
-
Remove the BEND P.C.B. mounting screws (
HP P.C.B.
-
Remove the HP P.C.B. mounting screw(
3 pcs.) as shown in
Fig.11
"Removing the top cabinet
2 pcs.) as shown in
) as shown in
Fig.12
22
Fig.11 .
").
Fig.12 .
Fig.12 .