Table of Contents
Advertisement
Page - 8
Important Safety
Instructions – 2
Operation
Introduction - 3
The amplifier's On/Off Switch is a rocker-type switch located on the left side of the front
The TRA Series - 4
panel. Turning on the amplifier initiates start-up by activating the inrush current limiter.
Physical Description - 5
When using the remote On/Off function, the main On/Off switch must remain in the On
Installation – 6
position. See page 11 for more information on remote On/Off connections.
Operation – 8
Troubleshooting - 9
NOTE: The power switch does NOT isolate the appliance from mains. Make sure the mains
Spec Table - 10
power socket or an alternative disconnect device is near by and easily accessible. When the
amp is connected to mains, the line-filter and the input of the silicon-controlled rectifier
Dimensions - 11
(fuse) are energized.
Warranty - 12
Operator Manual – TRA Series Amplifiers
Copyright© 2006 – Ashly Audio Inc.
Advertisement
Table of Contents
