Chrysler 300 2014 Owenrs Manual page 333

When making a selection, press the soft-key to enter the
desired mode. Once in the desired mode press and release
the preferred setting until a check-mark appears next to the
setting, showing that setting has been selected.
Once the setting is complete press the "Back Arrow"
soft-key to return to the previous menu or press the "X"
soft-key to close out of the settings screen. Pressing the
"Up" or "Down" arrow soft-keys on the right side of the
screen will allow you to toggle up or down through the
available settings.
Display
After pressing the Display soft-key the following settings
will be available.
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, touch and
release the "Day," "Night" or "Auto" soft-key. Then
touch the back arrow soft-key.
UNDERSTANDING YOUR INSTRUMENT PANEL 331
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the "+" and
"–" setting soft-keys or by selecting any point on the scale
between the "+" and "–" soft-keys. Then touch the back
arrow soft-key.
• Display Brightness With Headlights OFF
When in this display, you may select the brightness with
the headlights off. Adjust the brightness with the "+" and
"–" setting soft-keys or by selecting any point on the scale
between the "+" and "–" soft-keys. Then touch the back
arrow soft-key.
• Set Language
When in this display, you may select one of three
languages for all display nomenclature, including the trip
functions and the navigation system (if equipped). Touch
the "Set Language" soft-key and then touch the desired
4