Chrysler 300 2014 Owenrs Manual page 169

Changing The Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Com-
mand system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167
Starting Voice Recognition (VR) Session In
Radio/Player Modes
In this mode, you can say the following commands:
NOTE: The commands can be said on any screen when
a call is not active after pushing the Uconnect® Voice
Command button.
Source
To switch to the audio source, say "Change source to
Disc" for example. This command can be given in any
mode or screen:
• "Track" (#) (to change the track)
3