Hot Surface Indicator; Cooking Areas - Samsung NE58F9500SS User Manual

Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.

Cooking areas

• The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
• Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking surface. The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 36.
33_ surface cooking
(IB_Better)NE58F9500SS_DG68-00499A_EN_130425.indd 33
5
2
1 3
6
4
1. Left Front: 6"/9", 3,000 W
2. Left Rear: 6", 1200 W
3. Right Front: 9"/12", 3000 W
4. Right Rear: 6", 1,200 W
5. Warming Center: 100 W
6. Hot surface indicator
2013-04-25 4:36:11