Part 4 - Prepare Heater Location; Before Locating The Heater - Pioneer PHR100-55 Instruction Manual

CLEARANCE
ACCESS
Figure 2 – LP-325-M
PART 4 – PREPARE HEATER LOCATION
Before considering location, there are many factors to be addressed. These factors are covered in detail
in this installation manual. Please read the entire manual, as it could save time and money. Piping,
Venting, and Condensation Removal are just a few of the issues that need attention prior to the
installation of the heater.
A. BEFORE LOCATING THE HEATER
Check for nearby connections to:
•
System water piping
•
Venting connections
•
Gas supply piping
•
Electrical power
•
Condensate drain
Check area around heater. Remove any combustible materials, gasoline, and other flammable liquids.
Failure to keep heater area clear and free of combustible materials, liquids, and vapors can result in
substantial property damage, severe personal injury, or death.
The heater gas control system components must be protected from dripping water during operation and
service.
13