Connecting the Optional External Buzzer
When using the optional external buzzer (OT-BZ20), install the optional external buzzer.
If your printer is not equipped with a buzzer, you can use the optional external buzzer (OT-
BZ20) by connecting it to the drawer.
• The optional external buzzer and the drawer cannot be used together at the same time.
• If you configure the memory switch (customized value) setting to enable the optional
• Make sure to use the accessory magic tape (hook and loop fastener) to attach the
• Be careful not to spill water, oil, solvent, or any other liquid over the printer. Doing so may
Unpacking
Open the package and confirm that it contains all of the parts listed in the illustration. If any
parts are missing or damaged, please contact your dealer for assistance.
Optional external buzzer
66
external buzzer, the drawer cannot be opened because the pulse is not sent to the
drawer kick connector pin.
optional external buzzer to the printer.
result in malfunction of the printer.
Affixing tape
User's Manual
(1 pair, 2 pieces)