Zenith CM-150 Series Service Manual page 9

TRK4000 REMOTE CONTROL - KEYS DEFINED
INDICATOR LIGHTS
Illuminate to show which
mode remote is in.
MODE LEFT/RIGHT
Adjust which mode remote
is working in.
MUTE
Press once for Soft Mute, again
for Full Mute, and a third time to
return to normal volume.
SURF
Use the regular channel selection or
customized channel Surf lists.
VOLUME LEFT/RIGHT
Increases/descreases sound level.
SOURCE
Push to switch between
available sources connected to
your Entertainment Machine.
Displays functions on VCR
RECORD, PAUSE
Control functions on VCR
ARROW KEYS
Allows user to move through
on-screen menu choices.
REW , FFD, PLAY, STOP
Controls functions on VCR
CM150/PV150
MENU
rew
Remote Control Part Number
124-219-01
cable
mode
surf
play
f.fwd
stop
1-3
POW ER
Turn your Entertainment Machine
or any other programmed equipment
on or off, depending on mode
TRAKBALL
Click and move the on-screen pointer.
FLSHBK
Return immediately to the last
channel viewed.
CHANNEL UP/DOW N
Scroll through your available
channels.
NUMBER PAD
For direct channel selection
and programming functions.
ENTER
Push to accept menu choices or after
channel numbers for faster transfer.
PIP SNAPSHOT
press to capture and freeze main
picture within large PIP frame. Press
a second time and receive PIP from
another channel or source. Press a
third time to remove PIP.
QUIT
Leaves programming menus and
clears screen of displays, and provides
audio swap.
GM CHASSIS